Data card setup load setup, Data card setup, Load setup – TeeJet LH665 VRT User Manual
Page 42: Step key procedure 1, Press the load key and this screen is displayed
A
PPLICATION CONTROL
,
ENCODE
&
CALIBRATION
LH 665 VRT O
PERATORS MANUAL
4.8
LH A
GRO
DATA CARD SETUP
As many data card and data management functions are the same for all
operating modes in the LH 665, the functions are described in the DGPS and
DATA CARD AND DATA MANAGEMENT chapters in this manual.
LOAD SETUP
Step Key
Procedure
1
LOAD
Press the LOAD key and this screen is displayed:
EDIT
EXIT
LOAD SETUP
Field:
F1: HILTON
Load:
L10:
Speed Sensor
WHEEL
Start
Date:
19/9/2000
Start
Time:
16:15
Controller
LH AGRO LH 5000
2
Highlight the setting to be changed using the ARROW
UP/DOWN keys.
3
EDIT
When the setting is highlighted, press the EDIT key.
4
ACCEPT
A
Alter the setting using the ARROW UP/DOWN keys and
press the ACCEPT key.
5
EXIT
Press the EXIT key when all the settings are correct.
Speed sensor:
The sensor used for the selected load is encoded here. WHEEL is normally used.