TeeJet Legacy 6000 CAN Guide - Manual (Page 111)

Fieldware for the Legacy 6000
Software Version 2.11
Chapter 3 - Real-time Setup 3-41
Product Setup
One Prescription Map for All Products
Repeat the procedure below for each product (PCM) and select the same prescription map for
each PCM. Make sure to change the Layer to distinguish which product is assigned to each PCM.
1. From the ARM Launcher page select Product Setup.
2. Select the Desired PCM to be setup.
3. Locate and select Prescription in the center of the
screen.
4. Select the desired prescription map by using the Up
and Down arrows to scroll through the option high-
lighted in blue in the center of the screen. Note: None
is the default setting and does not mean that there is
no prescription maps loaded.
5. Locate and select layer from the center of the
screen.