Manually naming a job, Automatically naming a job, Lly (figure 3-3) – TeeJet Legacy 6000 CAN Guide User Manual
Page 75
Fieldware for the Legacy 6000
Software Version 2.11
Chapter 3 - Real-time Setup
3-5
Starting a Job
Manually Naming a Job
From the New Job Name page (Figure 3-3). Using the arrow keys enter the name of your job. It is
not necessary to use all numbers in the job name. It can contain alpha-numbers characters. When
the desired job name is entered, press the Forward Arrow to save the name and return to the Job
page.
Automatically Naming a Job
The second method to create a job is to press the Auto-name button in the Create Job page. This
will name the job based on the current date followed by the number that job is for the day. There-
fore the first job on January 31st 2005 would automatically be named 01312005-1. The second job
for the same day would be named 01312005-2.
Figure 3-3: The Job Name Page
Auto-name button