TeeJet Legacy 6000 CAN Guide - Manual (Page 77)

Fieldware for the Legacy 6000
Software Version 2.11
Chapter 3 - Real-time Setup 3-7
ARM Launcher
ARM Launcher
When the appropriate Job name has been selected, press the Forward Arrow in the Job page to
move to the ARM Launcher page (Figure 3-5). Several applications can be launched from this
page that are required prior to starting up real-time product application. Each real-time setup appli-
cation is discussed in detail below.
No PCMCIA Card Setup
If the PC Card setting in Console Setup is set to NO, the ARM Launcher looks slightly different.
Because no data is stored to the PC cards there is no need to name any files or setup any report
information that would be stored in the (.RCD) file. Therefore the Job Report application will not be
included, and any file selections in ARM Setup will not be included.
Figure 3-5: The ARM Launcher Page
Figure 3-6: ARM Launcher (No PC Card)