TeeJet Legacy 6000 CAN Guide - Manual (Page 50)

2-20 Chapter 2 - Getting Started
Product Control Module (PCM) Setup
Fieldware for the Legacy 6000
Software Version 2.11
Page
Name
Description
Allows a setup configuration to be selected or saved.
Defines the type of product application or device being controlled, such as Liquid or Granular.
Select the drive circuit used to control the product delivery or device.
Select the units used for the application rates.
Defines the type of sensor used for the primary control function.
Defines the type of sensor used for the secondary control function.
Defines the type of sensor used as a monitor. There are four monitor pages. This sensor is not
used for product control.
Allows the PCM configuration to be saved as a favorite and updates the PCM with the new config-
uration.
Table 2-5: PCM Setup - Main Setup Headers