TeeJet Legacy 6000 CAN Guide - Manual (Page 156)

5-2 Chapter 5 - System Tools
5System Tools
Fieldware for the Legacy 6000
Software Version 2.11
System Tools
System Tools allows some basic system diagnostics to be performed. System Tools is accessed
from the Main Launcher page. To access the System Tools launcher, press the Tools button in the
Main Launcher page (the help text should say View System Tools). This action brings up the Sys-
tem Tools launcher page. Table 5-1 below lists the current System Tools. Each tool is covered in
more detail in sections below.
Figure 5-1: The Main Launcher
Tool Description
Device Manager This tool allows the viewing of all components on the Legacy system includ-
ing the Mid-Tech CAN Bus, external rate controller, and GPS receiver.
Card Manager This application runs in conjunction with the PC card. The card must be
inserted to run this application. Card manager allows basic file manipula-
tion.
Table 5-1: System Tools