ThermoWorks 292-701 SAF-T-LOG PAPERLESS HACCP THERMOMETER Operating Instructions - Manual (Page 10)

10
Creating a New Checklist
Click the ‘New Checklist’ button to open the editing window The
tabs on the left sidebar allow items and users to be added to
the checklist as well as format the data report from temperature
readings that will be downloaded
Creating Users
In the ‘Users’ tab, click the plus (+) or double click ‘New User’
and type in the required name Click the plus (+) to add another
User up to a maximum of 25 The User names can be sorted in
ascending or descending order by clicking the ‘A to Z’ or ‘Z to A’
buttons or moved up and down the list individually by pressing
the (a) or (e) arrows The order in which the users appear in
the PC software is the order they will appear on the Saf-T-Log thermometer To delete a User highlight the user
name in the list and click the minus (-) button
Creating Items
In the ‘Items’ tab, double click ‘New Item’ and type in the required
name Double click the High or Low Limit temperatures to type
in a new temperature value or use the up/down buttons in the
relevant box to scroll the temperature in one degree steps The
High Limit cannot be set equal to or lower than the Low Limit and
vice versa
Click the plus (+) to add another temperature item up to
a maximum of 300 Click the icon to add a Yes/No
question If long item names are used (greater than 16 characters), the maximum number of items allowed
will decrease and be displayed at the top of the item list, i e “15 out of 295 items used” To increase the
maximum number of items available, simply use item names less than 16 characters in length For single
checklist users, a warning box will appear when trying to load a checklist with over 250 items Continue to
load the checklist onto the Saf-T-Log device and it will load
Software
Getting Started -
Creating your checklist
YES
NO