ThermoWorks 292-701 SAF-T-LOG PAPERLESS HACCP THERMOMETER Operating Instructions - Manual (Page 8)

8
Software
Before You Begin
Configure
Click ‘Configure Saf-T-Log’ to assign a name or ID tag to each Saf-T-Log device The serial number of
the Saf-T-Log that is connected is displayed at the top of this window as well as the current instrument
firmware version A password can be created by clicking the ‘Password Protection’ button to lock users from
accessing this window (call ThermoWorks for password reset instructions) Once the desired settings are
completed, click ‘Update’ to immediately update the connected Saf-T-Log The Sensor Trim is also managed
from this screen and adjusts the Saf-T-Log at one temperature point if calibration is required This function is
only active with a Saf-T-Log unit connected to the PC
Settings
In the settings section, the user can choose to automatically purge readings from the handheld device, store
reports to a specific directory and change defaults
To automatically purge readings when the Saf-T-Log is connected check the purge readings box With the
box checked, when a device is connected the readings will be deleted after they are downloaded If left
unchecked readings remain on the device until the user is ready to purge them To purge readings, select
the checkbox before connecting the device and readings will be deleted after downloaded ‘Settings’ allows
the user to choose the location of the saved reports on the PC Dragging and dropping the yellow boxes
containing ‘Day’, ‘Month’ etc into the empty boxes above will create a sub file structure within the save
directory Up to 3 levels of sub structure can be defined in this way When the Saf-T-Log is reconnected to
the PC after readings are taken, the reports will be automatically saved into the folder structure created in the
‘Save Directory’ setting Network drives and cloud storage locations can be used to save Saf-T-Log reports
NOTE: It is NOT recommended to adjust the ‘Sensor Trim’ value without appropriate temperature
standards and experience. Call ThermoWorks technical support for more details.