Automatic return setting – Toa C-CC774 PL User Manual
Page 15
15
4.4. Preset Memory All Reset
Deletes all preset position data.
1. Select “PRESET” on the camera menu screen and press the
Set key.
The Preset Settings screen is displayed.
Preset setting screen
M E M O R Y
R E A D J U S T A L L P O S
M E M O R Y R E S E T
M E M O R Y A L L R E S E T
A U T O R E T U R N
H O M E
P R E S E T F R E E Z E
* * *
P O S
N O
O F F
1 P O S
O F F
*
P R E S E T
*
2. Select “MEMORY ALL RESET” with the joystick and press the
Set key.
3. Select “YES” with the joystick and press the Set key.
Deletes all preset position data.
2. Select “AUTO RETURN” with the joystick and press the Set
key.
3. With the joystick, select “OFF,” “5s,” “10s,” “15s,” “20s,” “30s,”
“45s,” “1min,” “3min,” or “5min,” then press the Set key.
The program to which the camera will automatically return or
release (OFF) is then set.
Note
This function operates separately from the automatic return
function of the C-RM500, disabling the automatic return hold
function by way of alarm hold of the C-RM500. If hold function is
required, use the automatic return function of the C-RM500.
M E M O R Y
R E A D J U S T A L L P O S
M E M O R Y R E S E T
M E M O R Y A L L R E S E T
A U T O R E T U R N
H O M E
P R E S E T F R E E Z E
* * *
P O S
N O
O F F
1 P O S
O F F
*
P R E S E T
*
Preset setting screen
4.5. Automatic Return Setting
This function is used to determine operation when the camera is not controlled at all. The camera
automatically reverts to the initially set program when the preset period of time elapses after the controller’s
control has been finished.
1. Select “PRESET” on the camera menu screen and press the
Set key. The Preset Settings screen is displayed.