Toa C-CC774 PL - Manual (Page 76)

76
12.8.2. Action setting
Set operations that will take place when sensors are activated.
1. On the Maintenance screen, select “MOTION DETECTION”,
then press the Set key.
2. Select “1POS,” “2POS,” “254POS,” or “255POS” with the
joystick, then press the Set key.
3. On the Motion Detection Setting screen, select “ACTION”,
then press the Set key.
4. On the Motion Detection Action Setting screen, select the area
number to be set, then press the Set key.
5. Select “OFF,” “ *** POS,” “AUX1 ON,” “AUX1 OFF,” ”AUX2
ON,” “AUX2 OFF,” “TOUR1 – 16,” “TRACE1,” “TRACE2,” or
“ALARM1 – 8” with the joystick, then press the Set key.
OFF: No operation.
*** POS: Presets to the designated position.
TOUR1 – 16: Activates the selected camera’s Tour
sequence.
TRACE1, TRACE2: Activates selected trace functions.
AUX1 ON, AUX1 OFF:Performs specified operations at
specified contact numbers.
AUX2 ON, AUX2 OFF:Performs specified operations at
specified contact numbers.
ALARM1 – 8: Activates the alarm and performs the
same operation as when an alarm
signal is received at the specified alarm
number.
Note
Avoid specifying the level in the “Time” settings of the set alarm number.
5-1 When selecting function other than“ *** POS”
The Action designation is terminated.
5-2 When selecting “ *** POS”
Designate the position number, then press the Set key.
The Action settings are terminated.
Note
AUX2 : C-CC564 and C-CC574 only
P O S 1
F U N C T I O N
A C T I O N
* M O T I O N D E T E C T I O N *
O F F
Motion detection setting screen
M O T I O N D E T E C T I O N
P R I V A C Y M A S K
F R O N T P A G E
* M A I N T E N A N C E *
1 P O S
Maintenance setting screen
P O S 1
C H E C K
A R E A 1
* M O T I O N D E T E C T I O N *
O F F
A R E A 2
A R E A 3
A R E A 4
A R E A 5
A R E A 6
A R E A 7
A R E A 8
O F F
O F F
O F F
O F F
O F F
A U X 1 O N
A L A R M 2
Motion detection area setting screen