Toa C-CC774 PL - Manual (Page 74)

74
12.7. Data Backup
Setting data can be transferred to or read out from the backup memory. However, data cannot be backed up
for Privacy Masking, alarm logs, date, and time.
Note
When setting data has been transferred from the backup memory to the main memory during repair or
replacement of equipment, set the preset memory again. Since each camera’s basic information is backed up
in preset memory, preset positions can deviate if the data is transferred to another camera.
1. On the Maintenance screen, select “DATA BACKUP”, then
press the Set key.
2. On the Data Backup screen, select the data transmission
direction, then press the Set key.
3. Select “YES” with the joystick, then press the Set key.
The data transfer is started.
“Main Backup”: Stores the setting data in the backup
memory.
“Main Backup”: Reflects the setting data stored in the
backup memory to the camera.
12.8. Motion Detection Settings (C-CC564, C-CC574, C-CC764 and C-CC774 only)
When any movement is detected within the set area, preset positions can be played back, the tour sequence
is called up, or the contact opened and closed.
Note
This function is not a dedicated device for prevention of fire, etc. TOA takes no responsibility for any incidental
loss or accidents. While the motion detection function is operating, certain other functions (slow shutter, day &
night, Privacy Masking) cannot be used.
D A T A B A C K U P
M A I N
M A I N
* M A I N T E N A N C E *
N O B A C K U P
B A C K U P N O
Data backup setting screen
N O I N I T I A L I Z E
R E F R E S H
P A S S W O R D
M O T O R P O W E R
F A C T O R Y P R E S E T
A U T O A D J U S T
D A T A B A C K U P
N E X T P A G E
* M A I N T E N A N C E *
O N
O F F
N O
O F F 1
Maintenance Setting screen