Toa C-CC774 PL - Manual (Page 54)

54
8.5. Operation (Action) Setting
Specify the camera’s operation (Action) when an alarm signal is received.
Note
The camera’s alarm function, and the C-RM500 Controller’s camera alarm function and camera alarm preset
function are operated independently, and cannot be used together. Also, the C-RM500’s alarm hold function
cannot be used to hold alarm operation.
To enable the camera’s alarm operation function, set the C-RM500’s Camera Alarm Settings to OFF.
1. On the Alarm Setting screen, select “ACTION”, then press the
Set key.
2. On the Alarm Action Setting screen, select the number, then
press the Set key.
3. Select “OFF,” “ *** POS,” “TOUR1 – 16,” “AUX1 ON,” “AUX2
ON,” “AUX1 OFF,” “AUX2 OFF,” “TRACE1,” “TRACE2,” or
“HOME” with the joystick, then press the Set key.
3-1 When item other than “ *** POS” is selected
Selecting the items other than “ *** POS” records camera
operation (Action).
3-2 When “ *** POS” is selected
3-2-1 Enter the position number with numerical keypad, then
press the Set key.
3-2-2 Pressing the Set key displays the selected position
number on the monitor screen.
4. Repeat Step 2, 3 to record the camera operation corresponding to each receiving input number.
Note
AUX2 : C-CC564 and C-CC574 only
Alarm setting screen
I N P U T
* A L A R M *
R E P O R T
A C T I V E S T A T E
P R I O R I T Y
A C T I O N
I N T E R V A L
R E S E T A C T I O N
A L A R M D A T A
Alarm action setting screen
* A L A R M *
A C T I O N
- - - - - - - - - - - - - - - - - - - - - - - - - - -
1 : O F F
2 : T R A C E 1
3 : O F F
4 : O F F
6 : O F F
5 : O F F
7 : O F F
8 : O F F