Toa C-CC774 PL - Manual (Page 18)

18
5.1.1. Setting display items
Display setting “ON” or “OFF” for each ID can be set by selecting “INDIVIDUAL” on the ID display screen.
1. Select the desired ID on the ID display screen with the joystick and press the Set key.
2. Select “ON” or “OFF” with the joystick and press the Set key.
(Setting contents can be displayed on the screen when setting item is set to “ON.”)
Note: The ID setting items that can be displayed are as follows.
Displays the time in accordance with the time (hour, minute) setting (timer setting) format.
(Format: fixed 5 or 7-charactors)
Setting Item Setting Contents
Displays the camera address and camera position No. Title length can be freely adjusted
from 3 to 7 digits. (Camera address: DIP switch 1: for setting, factory-preset: 001)
[ ] Camera address - Position number
Address
Displays the Camera Title. * 1 Camera
Displays the Position title (1 – 255). * 1 Position
Displays the Trace title (1 – 2). * 1 Trace
Maximum character length can be set in the range of 1 to 8 characters. (factory default : 8 characters) * 1
Displays the Auto-Pan title. * 1 Auto-Pan
Displays the Tour title (1 – 16). * 1 Tour
Displays the Home Position title (1 – 3). Up to 3 titles can be set.* 1 Home
Displays the Alarm title (1 – 8). * 1 Alarm
Displays the title for the sectors split in the panning direction.
Setting North permits the direction to be automatically divided into 8 sectors.
(north, north east, east, south east, south, south west, west, and north west) *
1
Sector
Displays the AUX contact output title (1 – 2). AUX
Displays the coordinate. Pan (0 to 359)/ Tilt (5 to -185) fixed 8 characters.
[ ] Pan angle (0 to 359)/ Tilt (5 to 185)
Coordinate
Displays the Electronic Zoom. Fixed 3-charactors. Lens
Displays the date in accordance with the date setting (timer setting) format.
Fixed 8-charactors. Date
Time
***
-
***
*** /- ***