Wingscapes BirdCam Pro - Manual (Page 11)

Definitions
3 Tree Mount Socket
Is used to mount your camera to a tree or pole using tree mount, tripod accessory or Outdoor Camera
Mounting Bracket (sold separately). Visit us at www.wingscapes.com for more information.
5 Laser Aim / Power Switch
This switch has two functions. lt will assist in aiming your camera with the use of the laser diode.
It will also turn the camera power ON and OFF.
6 Infrared Sensor
Detects motion and tells the camera when to activate using the preferences setup by the user.
7 LED Flash
In low light situations the LED flash will activate.
8 Focus Range Setting
Set focus carefully. Focus is especially critical at short distances. It is best to use a tape measure.
10 Viewfinder
Use this to aim the camera.
11 Water-Resistant Seal
Helps keep moisture out of the unit during wet conditions.
12 Laser
Use this to aim the camera.
13 Microphone
For recording sound when video option is selected.
14 Up / Down Buttons
The up or down buttons are used to move up or down to change the values for each setting.
15 OK / Select Button
Used to select the settings for the camera.
16 Left / Right Buttons
Used to move forward or backward when changing the values of the settings or moving to the
next setting or field.
17 TFT Display
Shows important operational information such as battery level, picture count, camera features and
setting options and image review.
18 Battery Chamber Release Button
Press the button to release the battery holder.
19 Rotary Dial
Depending on the position of the dial, there are 5 possible functions: PLAYBACK, SETUP, MOTION,
TIMELAPSE, MOTION+T.L.
21 SD Card Slot
Will accept SD cards up to 32 GB. To extract SD card, gently push the card inward and let go. The card
should pop out enough to remove. Camera should be powered down when installing and removing
SD Card.
22 TV Out
Is used to view stored pictures or videos on an external monitor.
24 USB Out Port
Is used to connect your camera to a computer or external device to download, view, or delete
pictures and videos off the camera.
25 Tripod Socket
Used to mount your camera to a tripod when necessary (sold separately). Visit us at
www.wingscapes.com for more information.
26 Battery Chamber
Used to store batteries. Note: make sure that your (+ or -) polarities match the polarities indicated
inside the battery chamber.
27 12V DC Power Port
Used to connect an external power source. Accepts Wingscapes accessories. Visit us at
www.wingscapes.com for more information. Unapproved power sources may damage the camera
and void the Manufacturer’s Warranty.
Page 11 BirdCam PRO User Guide