Wingscapes BirdCam Pro - Manual (Page 14)

2.1 TEST PHOTO - Press OK button to take test photo with
current settings. The display will show a countdown and then
capture a photo. This photo will then appear on the display for
review until the OK button is pressed again.
2.2.2 PHOTO RESOLUTION - Select image resolution
desired for photos.
2.2.1 PHOTO, VIDEO, OR BOTH - Select option to capture
a photo, video or both when camera is triggered.
2.2 ADVANCED SETUP - Press the LEFT (<) button to enter
the Advanced Setup options. Once in the Advanced Setup
Menu, press LEFT (<) to move between the option windows.
To change the options, press (+) or (–) to change the value,
and LEFT (<) and RIGHT (>) to move between fields. Press
OK to confirm changes to the option.
Page 14 BirdCam PRO User Guide
SECTION 2 - SETUP
To enter the SETUP mode, move the Rotary Dial to the
SETUP position.