Wingscapes BirdCam Pro - Manual (Page 17)

SECTION 3 - MOTION
To enter the MOTION DETECT mode, move the Rotary Dial to the MOTION position.
3.2 OPTIONS - Press the LEFT (<) button to enter the OPTIONS menu. Once in the OPTIONS
Menu, Press LEFT (<) button to move between the option windows. To change the options,
press (+) or (–) to change the value, and LEFT (<) and RIGHT (>) buttons to move between
fields. Press OK to confirm changes to the option.
3.1 TEST PHOTO - Press OK button to take test photo with
current settings. The display will show a countdown and then
capture a photo. This photo will then appear on the display for
review until the OK button is pressed again.
3.2.1 RESET MOTION DETECT OPTIONS - Select this
option to reset Motion Detect options to factory defaults.
3.2.2 SENSITIVITY - Select desired sensitivity setting of the
motion detection sensor. Higher settings will increase the
number of images captured, but will be more subject to
erroneous triggers.
Page 17 BirdCam PRO User Guide