Wingscapes BirdCam Pro - Manual (Page 7)

Tripods
For very precise placement and aiming,
no mounting method will beat a camera
tripod. A standard threaded tripod mount
(¼”-20) is embedded into the bottom and
rear of the BirdCam Pro. This allows users
to attach the BirdCam Pro to any tripod
or any of thousands of 3rd-party camera
mounting accessories – providing users
with a world of creative opportunities
through angle and height adjustment.
Mounting Strap
The BirdCam Pro comes with a Mounting
Strap to facilitate mounting. You will find
slots in the rear of the BirdCam Pro
through which a strap can be threaded.
Many users will tighten the BirdCam Pro to
a tree, then wedge a stick or piece of bark
between the BirdCam Pro and the tree to
facilitate aiming.
Mounting Arm Accessories
Wingscapes offers two optional mounting
accessories for the BirdCam Pro:
BirdCam Mounting Arm
(WSBR01)
and
Outdoor Camera Mounting Bracket
(WSBR02)
Both accessories allow you to easily mount
the BirdCam to a common bird feeder
pole, a post, a stake, a wall, or a tree. The
primary difference between these two is
that the BirdCam Mounting Arm is longer.
Numerous angle settings and 360° rotation
make these mounting arms one of the
most versatile setup options.
Your Wingscapes BirdCam Pro offers
nearly limitless mounting opportunities,
allowing you to capture images of wildlife
in practically any situation.
To read more about attracting birds to
your feeder and BirdCam Pro, visit our
website at www.wingscapes.com.
Page 7 BirdCam PRO User Guide