Wingscapes BirdCam Pro - Manual (Page 21)

5.2 OPTIONS - Use the LEFT (<) button to move through
the menu. MOTION+T.L. is a hybrid mode. Motion Detect
is active when the Timelapse program is NOT running.
Configure this mode using the Option menus in Motion Detect
and Timelapse modes. Press LEFT (<) or RIGHT (>) buttons to
go back MOTION+T.L. menu window.
SECTION 5 - MOTION+T.L.
To enter the Motion+Timelapse mode, move the Rotary Dial to the MOTION+T.L. position.
5.3 START - Use the RIGHT (>) button to move through the
menu MOTION+T.L. ACTIVE window will appear in the TFT
display. It will reflect Battery, Est Days, Taken/Capacity status.
If there is no activity for several seconds (depending on
Timelapse interval setting), the camera will automatically turn
off the display to conserve power. Use the LEFT (<) buttons to
STOP the action.
5.1 TEST PHOTO - Press OK button to take test photo with
current settings. The display will show a countdown and
then capture a photo. This photo will then appear on the
display for review until the OK button is pressed again.
Page 21 BirdCam PRO User Guide