Automated manual transmission, Checking fluid levels – Ram Trucks 2015 ProMaster Commercial - Diesel Supplement User Manual

Page 104

Advertising
background image

WARNING!

(Continued)

To avoid contamination from foreign matter or

moisture, use only new brake fluid or fluid that has
been in a tightly closed container. Keep the master
cylinder reservoir cap secured at all times. Brake
fluid in a open container absorbs moisture from the
air resulting in a lower boiling point. This may
cause it to boil unexpectedly during hard or pro-
longed braking, resulting in sudden brake failure.
This could result in a accident.

Overfilling the brake fluid reservoir can result in

spilling brake fluid on hot engine parts, causing
the brake fluid to catch fire. Brake fluid can also
damage painted and vinyl surfaces, care should be
taken to avoid its contact with these surfaces.

(Continued)

WARNING!

(Continued)

Do not allow petroleum based fluid to contaminate

the brake fluid. Brake seal components could be
damaged, causing partial or complete brake failure.
This could result in an accident.

Automated Manual Transmission

Checking Fluid Levels
To check the gear oil and check/replace the hydraulic

clutch operating system fluid, contact only your autho-

rized dealer.

WARNING!

Used gear oil contains substances that are hazardous
for the environment. It is advisable to have oil
changed by your authorized dealer where used oil
will be disposed of according to the law.

102 MAINTAINING YOUR VEHICLE

Advertising