Manual (m) (manual mode) – Ram Trucks 2015 ProMaster Commercial - Diesel Supplement User Manual

Page 51

Advertising
background image

• During low-speed driving conditions in first gear,

vehicle momentum changes may feel exaggerated in

response to changes in accelerator pedal position. This

behavior is normal and is similar to other vehicles

equipped with manual transmissions.

• At low speeds you may hear mechanical noises similar

to a manual transmission as the transmission changes

gears. These noises are normal and will not damage

the transmission.

• Very aggressive driving may result in some clutch

odor. A warning message will display in the EVIC if

cool down actions are needed.

• Before and after the engine is started, you may hear a

hydraulic pump for a short period of time. This noise

is normal and will not damage the transmission.

• During extremely cold temperatures, the transmission

will not operate if the oil temperature is -22°F (-30°C)

or below. When transmission actuation oil temperature

is lower than -22°F (-30°C), engine start will not be

allowed by PCM. For this reason the block heater is

recommended below -17°F (-27°C). Normal operation

will resume once the transmission temperature has

risen to a suitable level.

Manual (M) (Manual Mode)
In the MANUAL (M) position the driver is responsible

for choosing the best gear ratio to engage, depending on

driving conditions.
NOTE:

Do not press the brake and accelerator pedals at

the same time. Use only one foot to operate the brake and

accelerator.
To operate in MANUAL (M) mode:

• Press and hold the brake pedal.

5

STARTING AND OPERATING 49

Advertising