Stopping the engine – Ram Trucks 2015 ProMaster Commercial - Diesel Supplement User Manual

Page 43

Advertising
background image

and injector nozzles. Also, the unburned fuel can enter

the crankcase, diluting the oil and causing rapid wear to

the engine.

Stopping The Engine

Idle the engine a few minutes before routine shutdown.

After full load operation, idle the engine three to five

minutes before shutting it down. This idle period will

allow the lubricating oil and coolant to carry excess heat

away from the combustion chamber, bearings, internal

components, and turbocharger. This is especially impor-

tant for turbocharged diesel engines.
NOTE:

Refer to the following chart for proper engine

shutdown.

Driving

Condition

Load

Turbo-

charger

Tempera-

ture

Idle Time

(min.)

Before

Engine

Shutdown

Stop and

Go

Empty

Cool

Less than

One

Stop and

Go

Medium

One

Highway

Speeds

Medium

Warm

Two

City Traffic

Maximum

GCWR

Three

Highway

Speeds

Maximum

GCWR

Four

Uphill

Grade

Maximum

GCWR

Hot

Five

5

STARTING AND OPERATING 41

Advertising