Evic — displays, Diesel particulate filter (dpf) messages – Ram Trucks 2015 ProMaster Commercial - Diesel Supplement User Manual
Page 31
The system allows the driver to select information by
pressing the following buttons mounted on the instru-
ment panel to the left of the steering column:
Refer to “Electronic Vehicle Information Center — If
Equipped” in the Owner’s Manual for further informa-
tion.
EVIC — Displays
Diesel Particulate Filter (DPF) Messages
• “DPF cleaning: safely keep the vehicle moving” message
on the EVIC + Engine emission filter lamp lighted solid
indicates that the exhaust particulate filter loading is
above the specified range and a regeneration is required.
• Safely Drive at Highway Speeds to Remedy (the
procedure lasts roughly 15 minutes at speed of about
40 mph (60 km/h) and with engine speed above
approximately 2000 rpm).
• When the exaust filter is overloaded the MIL lamp will
turn on and the “Service engine” message will display
in the EVIC, ETC lamp blinks and the PCM limits the
engine power to limit the likelihood of permanent
damage to the after-treatment system. To correct this
condition it will be necessary to have your vehicle
serviced by an authorized dealer.
EVIC Control Buttons
4
UNDERSTANDING YOUR INSTRUMENT PANEL 29