Ram Trucks 2015 ProMaster Commercial - Diesel Supplement - Manual (Page 59)

MESSAGE DESCRIPTION
Press Brake And Try Again This message appears accompanied, in some cases, by a warning
buzzer, if you attempt to change gear with the vehicle parked
without pressing the brake pedal.
To shift the transmission (with key on/engine off), press and hold the
brake pedal, move the shift lever to NEUTRAL (N), then move the
shift lever to the desired position.
Shift To Neutral This message appears, together with a warning buzzer, when the
shift lever must be moved to the NEUTRAL (N) position.
When the shift lever is moved to NEUTRAL (N) the message on the
display should go off.
Contact your authorized dealer if the message continues to appear.
Press Brake Pedal This message is shown in the display together with an acoustic sig-
nal, when the brake pedal is not pressed during a starting attempt.
Press Brake Shift to N key to start This message appears, after the door opening, to remind to Press the
Brake pedal and shift the lever in N to permit the cranking.
5
STARTING AND OPERATING 57