Canon C3200 - Manual (Page 266)

Checking/Changing the Status of Send Jobs 7-11
Chec
king/Changing the Send/Receiv
e Status
7
6
Press [OK].
The job is sent to the specified destination.
7
Press [Done] repeatedly until the Send Basic Features screen
appears.
Resending a Job
You can resend jobs that are canceled due to transmission errors.
IMPORTANT
To be able to resend jobs that have been canceled due to a transmission error, you must
first set Erase Failed TX in TX Settings under <Common Settings> in Communications
Settings (from the Additional Functions screen) to 'Off'. (See "Automatic Document
Deletion," on p. 8-4.)
1
Press [System Monitor]
➞ [Send].
If necessary, see the screen shots in steps 1 and 2 of "Checking Send Job
Details," on p. 7-2.