Standard send settings, Standard send settings -12, See "standard – Canon C3200 User Manual
Page 291: Send settings," on p. 8-12.), P. 8-12
Standard Send Settings
8-12
Customizing Comm
unications Settings
8
Standard Send Settings
This mode enables you to change the standard settings for the Send function,
including the scan mode and the file format. (See "Selecting a Scan Mode," on
p. 3-2, and "Sending Methods," on p. 5-2.)
NOTE
•
If the optional Super G3 FAX Board is installed, and you are sending documents by fax,
the file format set here is disabled.
•
The default settings are:
- Scanning Mode: ACS 200x200 dpi
- File Format:
TIFF/JPEG
1
Press
(Additional Functions)
➞ [Communications
Settings]
➞ [TX Settings] under <Common Settings>.
If necessary, see the screen shots in steps 1 and 2 of "Automatic Document
Deletion," on p. 8-4.
2
Press [
▼] or [▲] until [Edit Standard Send Settings] appears
➞ press [Edit Standard Send Settings].