Canon AXIS 1650 - Manual (Page 14)

Print Server Installation
14 AXIS 1650 User’s Manual
Set an IP Address with NetSpot Device Installer software
NetSpot Device Installer is software from Canon that allows you to assign
an IP address and manage Canon devices connected to your network.
NetSpot Device Installer software is supplied on CD-ROM with your
Canon printer and on www.canon.com
Depending on the provided CD-ROM, NetSpot Device Installer may not be
included. If this is the case, please download NetSpot Device Installer
from www.canon.com
Install NetSpot Device
Installer
1. In Windows 2000/XP, log on as an Administrator before installing. Insert
the CD-ROM supplied with your Canon printer into the CD-ROM drive of
your computer.
2. In Windows Explorer, double-click the CD-ROM drive icon.
3. Double-click NetSpot_Device_Installer => Windows => nsdisetup.exe
4. A license agreement will be shown in the window. Check the contents and
click Yes.
5. Specify the program destination folder and click OK. The installation will
launch.
If you check “Add to Start menu”, you can add NetSpot Device Installer to
your Windows Start menu.
6. When the installation is finished, click OK. You can now start the program,
see Set the IP Aaddress using NetSpot Device Installer, on page 14.
Set the IP Aaddress
using NetSpot Device
Installer
Follow these instructions to set the IP address using NetSpot Device
Installer:
1. Start the program. The main window will open. After a while a list of
devices detected on the network will be displayed.
2. Select the AXIS 1650 that displays the unit’s MAC address and default IP
address 196.168.0.90
The MAC address is based on the Serial Number ( S/N) of your AXIS 1650 and
is printed on the underside label of the print server.
3. From the Device menu, select Initial Settings.