Setting general parameters – Canon AXIS 1650 User Manual

Page 47

Advertising
background image

Print Server Management and Configuration

AXIS 1650 User’s Manual

47

Setting General Parameters

To change the print server’s general parameters, select Admin | General

Settings => Change in the Web interface.

Note: All print server settings have default values that have been

carefully selected by Axis. In most instances, there is no need to change

the default values. Observe that all network configuration should involve

the Network Administrator.

Print Server Name

This name identifies the print server to the users and will be part of the

default name of the connected printer and printer queue name. The

default name is AXISXXXXXX, where XXXXXX are the last six digits of

the print server serial number.

Example: If the serial number is 00 40 8c 18 16 36, the default print

server name is AXIS181636.

System Name

This name identifies the network printer to the users.

Default = <blank>

System Location

This parameter allows you to specify where the network printer is located

in your organization. This enables you to find the device you are working

with.

Default = <blank>

System Contact

Enter the name of e.g. the System Manager.

Default = <blank>

System Contact Phone Nbr.

Enter the telephone number of e.g. the System Manager.

Default = <blank>

System Comment

Enter comments regarding the network printer.

Default = <blank>

Language

Select the language to be displayed in the print server’s embedded Web

pages: English or Japanese.

Root Password

Enter a password in the field. Up to 15 alphanumeric characters can be

entered.

Default = <blank>

Network Speed

Set your network speed: 10_HALF_DX, 10_FULL_DX, 100_HALF_DX,

100_FULL_DX or let the print server sense the correct speed

(AUTO_SENSE).

Default = AUTO_SENSE

SNMP Enabled

Select Yes to permit access using the SNMP protocol, select No to reject
access using the SNMP protocol.
Default = Yes

Community Name

Specify the community name for SNMP. Up to 32 alphanumeric

characters can be entered.

Default = public

Advertising