Canon AXIS 1650 - Manual (Page 8)

Product Overview
8 AXIS 1650 User’s Manual
Supported
Environments
The AXIS 1650 supports printing over TCP/IP from the following clients:
• Windows 98
• Windows Me
• Windows 2000
• Windows XP
• Windows Server 2003
• Netware
Installation and
Integration
The installation of the AXIS 1650 and its integration into the network is
performed using one of these software combinations:
• AXIS IP JumpStarter (for IP setting) and then AXIS CAPT Print
Monitor (for printer installation)
• Canon NetSpot Device Installer (for IP setting) and then AXIS CAPT
Print Monitor (for printer installation)
• AXIS ScanClient to enable scanning through the AXIS 1650.
Configuration and
Management
Configuration and management of AXIS 1650 is performed using the
TCP/IP protocol. The main method is using a standard Web browser. See
“Print Server Management from the Embedded Web Pages” on page 40.
Printing Protocol: TCP/IP
Speed The AXIS ETRAX chip has been specifically designed for LAN products
and benefits users with a faster throughput than a direct PC-to-printer
connection. With a sustained data throughput of over 1 Mbytes per
second (100baseTX) the AXIS 1650 is fast. ECP high-speed
communication is supported.
Security: You can assign a password that restricts unauthorized configuration of
the AXIS 1650.
Monitoring: The AXIS 1650 embedded Web pages allow you to continuously monitor
printer status. Additionally, the AXIS 1650 supports SNMP for remote
monitoring.
Future proof: You can upgrade the AXIS 1650 Flash memory over the network. This
allows you to quickly update and enhance the operational features of
your AXIS 1650 when new print server software becomes available.
AXIS IP JumpStarter, AXIS CAPT Print Monitor and AXIS ScanClient
are available free of charge from the AXIS 1650 CD and on
www.axis.com
NetSpot Device Installer is available on www.canon.com