Canon AXIS 1650 User Manual

Page 50

Advertising
background image

Print Server Management and Configuration

50

AXIS 1650 User’s Manual

anticipates that there is a router available that automatically senses and

redirects the print server's packets to destinations outside the local

network segment.

Default value: 0.0.0.0

DHCP Enabled

Set to Yes to enable DHCP (Dynamic Host Configuration Protocol). DHCP

automatically downloads the IP address to each print server at startup.

Depending on how your network has been configured, other Internet

related parameters (such as the default router, subnet mask, etc.) might

also be set automatically. It is recommended that you verify the settings

when the server has been restarted and then enter any missing parameters

manually.

Default value = No (disabled)

BOOTP Enabled

Set to Yes to enable BOOTP (BOOTstrap Protocol). BOOTP downloads the

IP address to each print server at startup. Depending on how your

network has been configured, other Internet related parameters (such as

the default router, subnet mask, etc.) might also be set automatically.

However, we recommend that you verify the settings when the server has

been restarted and then enter any missing parameters manually.

Default value = No (disabled)

RARP Enabled

Set to Yes to enable RARP (Reverse Address Resolution Protocol). RARP

downloads the IP address to each print server at startup. This method only

operates over single network segments. Other Internet related parameters

(such as the default router, subnet mask, etc.) must be entered manually

as RARP only sets the IP address.

Default value = No (disabled)

DNS Server Address

Specify the IP address of the DNS (Domain Name Server). DNS uses

NetBIOS names to allow clients to locate resources on TCP/IP networks.

Default = 0.0.0.0

DNS Dynamic Update

Select Yes to enable DNS (Domain Name Server). DNS uses NetBIOS

names to allow clients to locate resources on TCP/IP networks.

Default value = No

DNS Host name

Specify DNS Host name. This name will be used in all environments as

the identifier of this print server.

Default value = <blank>

DNS Domain Name

Specify the name of the domain to which the print server belongs.

Domain refers to a set of computers on a network that have been assigned

a common name. A domain might contain several workgroups.

Default = <blank>

WINS Enabled

Select Yes to enable WINS (Windows Internet Name Service) over TCP/IP.

WINS uses NetBIOS names to allow Windows based clients to locate

resources on TCP/IP networks.

Default value = Yes

WINS Server Address

Specify the IP address of the primary WINS server. The WINS server is

used for identifying a computers by its host name instead of by its IP

address.

Default value = 0.0.0.0

WINS Host Name

Specify the WINS host name, which will be used as the identifier of your

Advertising