Cisco WUSB300N - Manual (Page 18)

Appendix A
Troubleshooting
17 Wireless-N USB Network Adapter
Appendix A:
Troubleshooting
Your computer does not recognize the Adapter.
Make sure that the Adapter is properly inserted into the
USB slot.
The Adapter does not work properly.
Remove the Adapter, and then reinsert it into the
computer’s USB slot.
Your computer cannot communicate with the other
computers linked via Ethernet in the Infrastructure
configuration.
Make sure that the computers are powered on. 1.
Make sure that the Adapter is configured with the 2.
same Wireless Network Name (SSID) and wireless
security settings as the other wireless computers in
the Infrastructure configuration.
WEB: If your questions are not addressed here,
refer to the Linksys website, www.linksys.com