Configuration – Cisco WUSB300N User Manual
Page 15
Chapter 3
Configuration
14
Wireless-N USB Network Adapter
Server Name
Enter the name of the authentication
server here.
Certificate
Select the Certificate installed to authenticate
you on your wireless network.
Encryption
Select the encryption type from the
Encryption drop-down menu.
Click Next to continue or Back to return to the previous
screen.
PEAP
WPA Enterprise - PEAP
Login Name
Enter the login name of your wireless
network here.
Server Name
Enter the name of the authentication
server here.
Certificate
Select the Certificate installed to authenticate
you on your wireless network. If you want to use any
certificate, keep the default setting, Trust Any.
Inner Authen.
The Authentication method used inside
the PEAP tunnel.
Encryption
Select the encryption type from the
Encryption drop-down menu.
Click Next to continue or Back to return to the previous
screen.
WPA2 Enterprise
WPA2 Enterprise features WPA2 security used in
coordination with a RADIUS server. (This should only be
used when a RADIUS server is connected to the Router.)
WPA2 Enterprise offers two authentication methods, EAP-
TLS and PEAP. You must enter the same security settings
used on your network.
Authentication
Select the authentication method your
network is using, EAP-TLS or PEAP.
EAP-TLS
WPA2 Enterprise - EAP-TLS
Login Name
Enter the login name of your wireless
network here.
Server Name
Enter the name of the authentication
server here.
Certificate
Select the Certificate installed to authenticate
you on your wireless network.
Encryption
Select the encryption type from the
Encryption drop-down menu.
Click the Next button to continue or the Back button to
return to the previous screen.
PEAP
WPA2 Enterprise - PEAP
Login Name
Enter the login name of your wireless
network here.
Password
Enter the password of your wireless network in
the Password field.
Server Name
Enter the name of the authentication
server here.