Cisco WUSB300N - Manual (Page 16)

Chapter 3
Configuration
15 Wireless-N USB Network Adapter
Certificate Select the certificate installed to authenticate
you on your wireless network.
Inner Authen. The authentication method used inside
the PEAP tunnel.
Click the Next button to continue or the Back button to
return to the previous screen.
RADIUS
RADIUS features use of a RADIUS server. (This should
only be used when a RADIUS server is connected to the
Router.) RADIUS offers two authentication types: EAP-TLS
and PEAP.
Authentication Select the authentication method your
network is using, EAP-TLS or PEAP.
EAP-TLS
RADIUS - EAP-TLS
Login Name Enter the login name of your wireless
network here.
Server Name Enter the name of the authentication
server here.
Certificate Select the Certificate installed to authenticate
you on your wireless network.
Encryption Select the encryption type from the
Encryption drop-down menu.
Click Next to continue or Back to return to the previous
screen.
PEAP
RADIUS - PEAP
Login Name Enter the login name of your wireless
network here.
Server Name Enter the name of the authentication
server here.
Certificate Select the Certificate installed to authenticate
you on your wireless network. If you want to use any
certificate, keep the default setting, Trust Any.
Inner Authen. The Authentication method used inside
the PEAP tunnel.
Encryption Select the encryption type from the
Encryption drop-down menu.
Click Next to continue or Back to return to the previous
screen.
The 6. Confirm New Settings screen appears next and
shows the new settings.
Confirm New Settings
To save the new settings, click Save. To edit the new
settings, click Back. To exit the Manual Setup through
the Wireless Network Monitor, click Exit.