Sears KENMORE 385.128418 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTiOIM 2. PREPARE YOUR
machíne
FOR SEWING
Prepare the Bobbin
To Remove the Bobbin Cass from the Machine
the machine by pulling it to the
left Open the shuttle cover by
pulling down the embossed part on
the left side of the cover.
Raise needle to its highest position
by rotating hand wheel toward you.
a Wind the Bobbin
Release clutch by turning clutch
knob toward you.
tie, pull open latch of bobbin case.
Pull bobbin case straight out of
shuttle.
11
Advertising