Sears KENMORE 385.128418 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Buttonholes
SECTION 3. LEARN THE STITCHES ;
Sat the Machine
Stitch setectof
n SuttCmhoSe guide tool
Adjusting the Stitch Density
Depending upon your fabric or your
own preference in buttonholes, you
may
alter
the
buttonhole
stitch
density within the blue buttonhole
range on the stitch length dial.
1.
For less density, turn the dial
toward "24".
2.
For mors density, turn the dial
toward "0”,
NOTE; Always make a practice but
tonhole on a scrap fabric you
plan to use to find the more
suitable stitch length.
1. a. Carefully mark the buttonhole
length on your garment.
b. Change to the buttonhole guide
toot,
c.
Insert the garment under the
foot with the buttonhole mark
ing running toward you.
©
Coarse
stiiches
tor heavy
fabrics
2. a. Moye the slider (A) toward you
so that the top mark (C) on the
slider meets the start mark fB).
b. Line up the markings on the
foot with the top mark on your
garment.
c. Lower the presser toot.
NOTE; The markings on the slider
are engraved in centimeters.
a. Set the stitch selector at iH] .
b. Sew forward until you reach the
front marking of your button
hole.
c. Stop sewing at the left stitch.
35