Sears KENMORE 385.128418 - Manual (Page 40)

SECTIONS. LEARN THE STITCHES
Sew in a Zipper (Continued)
9, Lower the presser foot and stitch
the rest of the seam.
fabric right side up.
INVISIBLE ZIPPER AND CORDING
INVISIBLE ZIPPER
Adjust the toot so the needle is sawing through
the center hole ot the foot and one groove ot
the toot IS riding on the teeth ot the zippar as
shown. Follow the zipper manutacturer's inst­
ructions. After zipper has been inserted, finish
sewing seam by shifting toot to side position
sewing through side notch.
CORDING
Foot can also be used to make cording tor slip­
covers etc. Cover a cord with a strip ot bias
iabric and sew as shown,
NOTE:
Use "Low Bar Sewing Machine ZIPPER FOOT"
(5757)
for "invisible zipper" and "cording",
which can be obtained at any Sears retail store.
per, set the zipper foot on the
right side of the needle.
12. Stitch across and below the bot­
tom of the zipper.
13, Turn the comer and continue to
guide the foot along the zipper
teeth, as shown.
Stitch through the fabric and
zipper tape.
zipper.
15. Lower the needle into the fabric
and raise the presser toot.
16. Remove the basting stitches and
open the Zipper.
17. Lower the toot and stitch the rest
of the seam. Make sure the fold ts
even.
38