Sears KENMORE 385.128418 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Prepare the Bobbin (Continued)
• Wind the Bobbin (Continued)
SECTION 2. PREPARE YOUR MACHÍNE FOR SEWING
Draw thread from spool through bobbin Pul! end of thread through hole in Place bobbin onto bobbin winder Wind thread until winder stops. Remove
winder tensfon disc as shown.
bobbin as shown.
spindle with end of thread coming from bobbin. Clip thread.
the top of the bobbin. Push bobbin
clutch knob
winder shaft to the right until it clicks.
Holding onto end of thread, start ma
chine. When bobbin is slightly filled,
smp off end of thread.
12
Advertising