Sears 385. 12714 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 2. PREPARE THE MACHINE FOR SEWING
o Pick Up the Bobbin Thread
N
1. Raise presser foot lever. Hold top
thread loosely in left hand and rotate
handwheel toward you one complete
turn.
top thread.
back of the presser foot, leaving 4
to 6 inches of thread clear.
If you cannot pick up bobbin thread by tollowing steps given above, then check:
1.
Is needle threaded from front to back?
2.
Is thread tangled around needle?
3.
Are 3 to 4 inches of thread coming from the shuttle?
4.
Is thread from shuttle tangled?
5.
Is bobbin property installed in the bobbin case?
6.
Is the machine threaded according to the instructions?
12
Advertising
This manual is related to the following products: