Sears 385. 12714 - Manual (Page 23)

SECTION 3. LEARN THE STITCHES
Lower the presser foot and stitch
the rest of the seam.
fabric right side up.
INVISIBLE ZIPPER AND CORDING
INVISIBLE ZIPPER
Adjust the toot so the needle is sewing through
the center hole ot the foot and one groove of
the toot is riding on the teeth of the zipper as
shown. Follow the zipper manufacturer's inst­
ructions. After zipper has been inserted, finish
sewing seam by shifting toot to side position
sewing through side notch.
CORDING
Foot can also be used to make cording tor slip­
covers etc. Cover a cord with a strip ot bias
fabric and sew as shown,
NOTE:
Use "Low Bar Sewing Machine ZIPPER FOOT"
(6757!
tor "invisible zipper" and "cording",
which can be obtained at any Sears retail store.
per, set the zipper foot on the
right side of the needle.
12. Stitch across and below the bot­
tom of the zipper.
13. Turn the corner and continue to
guide the foot along the zipper
teeth, as shown.
Stitch through the fabric and
zipper tape.
zipper.
15. Lower the needle into the fabric
and raise the presser foot.
16. Remove the basting stitches and
open the zipper,
17. Lower the toot and stitch the rest
ot the seam. Make sure the fold is
even.
21