Sears 385. 12714 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 5. CARE FOR THE MACHINE
Replacing the Light Bulb
Cleaning the Machine
1.
Unplug the machine and open the
face cover.
CAUTION I The light bulb could be
HOT.
Protect
your
fingers when you handle
it.
2.
Push the bulb up and turn the
bulb counter-clockwise to remove
It.
3.
Put the new bulb in by pushing it
up and turning it clockwise.
To insure that your machine operates at its best, you need to keep the essential parts clean at ail times.
The teed dogs and shuttle race areas can attract dust and lint. Your machine can become sluggish or knock loudly if a thread
IS caught.
Check and clean those areas about every three months under normal use.
If you sew frequently, dean more often.
e
Clean the Feed Dogs
1. Unplug the machine. Remove
presser foot and needle.
Using a screw driver, remove
needle plate.
2. Use a lint brush to clean the feed
dogs.
3. Replace needle plate.
38