SINGER W1523 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Push bobbin to right and press
down foot controller.
Machine stops automatically when
bobbin is full.
Push bobbin to left, to disengage
from wheel.
Take off bobbin from spindle and cut
thread.
Retighten stop motion knob.
If bobbin is wound unevenly as
shown, open top cover and use
screw driver to adjust the guide for
bobbin winding.
trouble
*
correction
9-
Advertising