Connecting foot controller and power corel – SINGER W1523 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Connecting Foot Controller
and Power Corel
Connect foot controller and power
cord Q) ® .
Before plugging in your machine, be
sure that voltage is same as that of
your machine (* written on a plate
at back of machine)
* Specifications vary from country
to country.
%
Put power switch on the machine
3nd turn on the sewing light.
on and off.
Always switch off or unplug machine
when not in use.
* Specifications vary from country
to country.
The more you press foot controller,
the faster the machine runs.
CAUTION: When machine is not
in use always detach plug from
wall outlet.
Advertising