SINGER W1523 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Set machine as shown.
7. SEWING ON BUTTONS
Position a button and material un
der foot. When needle comes to left
side of stitch, lower foot. Raise
needle and adjust zigzag width so
that needle comes to right hole of
Make one stitch be certain that nee
dle is aligned with botton’s holes.
Run machine at medium speed and
sew 5-6 z'gzag stitches.
Stop machine when needle is in
@ Set zigzag width control to 0,
align needle with button’s hole and
sew 3-4 stitches to prevent stitches
(5) Remove work and cut off
Draw thread ends through to wrong
side and tie a knot.