SINGER 9224 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TING NEEDLE POSITION
Note; needle position only works with straight stitch pattern. (--------------).
n
Center needle position.
(\
Left needle position.
Use stitch width lever
—
to position needle from
center
to
full
left
position.
«L X J»
Right needle position.
Use stitch width lever
to position needle from
center to full right
position.
Caution: Sew only in center needle positio
When bottom of fabric reaches
crosslines (2), stop stitching.
Lower needle into fabric.
Turn
fabric,
bringing
bottom
edge in line with guideline (1).
Continue stitching seam.
■
To attach seam guide, place
screw of guide into hole (1).
Position guide for desired seam
allowance.
Hand tighten screw.
To sew curved seams, attach
seam guide at an angle.
-
9
-