SINGER 9224 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Move
stitch
width
lever
to
straight stitch position (|)
Open slide plate.
Put an empty bobbin, with rings
(1) facing up, into bobbin case.
Close slide plate until it stops
against button (2).
Bring
needle
thread
under
presser foot and wind it around
presser foot screw (3) one time.
Hold thread and run machine,
at a moderate speed.
Watch bobbin winding from the
window (4) in slide plate.
Remove thread from presser foot
screw.
Push button (2) down to close slide plate.
Cut thread.
Advertising
This manual is related to the following products: