SINGER 9224 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising

CHANGING PRESSER FEET
mma
REPLACING PRESSER FOOT WITH SHANK
Lift toe of presser foot (1) up,
until it snaps off shank (2).
Take foot off machine.
Center new presser foot (1)
under shank (2).
Lower presser foot lifter.
Press screw (3) down.
Open slide plate.
Press tab (1) and (2) into
holes on needle plate.
Close slide plate.
16
-
Advertising
This manual is related to the following products: