2) determine length, 3) determine width, 4) buttonhole sewing – SINGER W1710 User Manual
Page 22: 3) determine width (4) buttonhole sewing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
a:
(2) Determine length
Measure diameter and thickness of
and add 0.3cm (1/8") for bar tacks.
Mark buttonhole size on material.
button
(3) Determine width
Determine width according to diameter of
button, its thickness, and kind of material.
Completely push back sliding part @ of
buttonhole foot.
Place .materia! under foot so that marking of
buttonhole passes through center of foot and
arrow ® of foot indicates beginning line of
marking.
(4) Buttonhole sewing
Bar tacking: Set pattern selection dial to 1 (CTi
and sew 5-6 stitches.
marking
r
-
19
-
■ -- -■ :
Advertising