SINGER W1710 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
10. SEWING ON BUTTON
Set machine as shown.
Position a button and material under foot. When
needle comes to left side of stitch, lower foot.
Raise needle and adjust zigzag width so that
needle comes to right hole of button.
Run machine at medium speed and sew 5-6
zigzag stitches.
Stop machine when needle is in upper position.
(a) Set zigzag width control to 0 and sew 3-4
stitches to prevent unstitching.
(b) Draw out work and cut off threads.
Draw thread ends through to wrong side and
tie a knot.
Advertising