SINGER W1710 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
29. IMSERTilMG BOBBIN
•fri, '«. -i
e„- *i
Place bobbin in its case with thread
in direction of arrow.
running
Guide thread into slot (a) of bobbin case.
Pulling thread to left, bring it under tension
spring then to delivery eye (g).
Raise needle in the highest position.
Leave end of thread of about 10 cm (4") from
bobbin case.
Take hold of latch and push bobbin case into
hook.
Release latch when bobbin case is fully inserted.
Advertising