SINGER W1710 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
23. APPLIQUE WORK
Set machine as shown.
Draw design on material to be used as an
applique and cut it out.
Place cut-out on base material and baste it.
Sew around outline with zigzag stitch adjusting
stitch length and width according to shape
and size of cut-out and type of base material.
To change direction at corners, or to sew very
small circles, stop machine, positioning needle
just away from edge of cut-out, lift presser foot
and turn material.
Lower presser foot and continue sewing.
Sew a few stitches at end with zigzag width
at 0.
This is to prevent unstitching.
Advertising