SINGER W1405 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CHANGING THE NEEDLE

1. Turn the balance wheel towards you until the needle is at is

highest position.

2. Loosen the needle clamp screw by turning its top edge

towards you. Remove the needle from the clamp.

3. Place the new needle into the needle clamp with it's flat

side facing away from you.Push the needle up into needle

clamp as far as possible;

4. Tighten the needle clamp screw firmly.

TO SELECT A SUITABLE NEEDLE

Stem

z>

Blue tipped needle

>

A number indicating the size

of needle is marked on the

stem.The higher the number,

the thicker the needle.

A BLUE TIPPED needle is

supplied with the machine.

'Do not use any needle which

is bent or blunted.

Advertising